Flat Roof Repair
Membrane turned up the parapet gets new base flashing and a resealed termination bar along with any field seam repairs.
Flat Roof RepairJoint covers resealed or replaced along the parapet cap.
Leak tracingTorn flashing patched and termination bars resealed at the wall.
Flat roof repairOpenings cleared and liners resealed so water leaves the roof.
All repair services
A Hartford commercial roof repair contractor finds many roof leaks are really wall leaks. Water enters at the coping, runs down inside the parapet, and shows up as a stain.
Parapet leaks leave clues outside, inside, and up top.
Dark streaks under the coping show water getting into the wall at the top.
Open joints between coping sections are often visible from the ground.
Metal strips pulled out of the mortar line above the roof flap in wind and open the top of the base flashing.
Wet plaster or peeling paint high on an outside wall points to the parapet above it.
Leaks that appear only with wind-driven rain often enter through coping or counterflashing.
Splits where the membrane turns up the wall let water behind the termination bar.
Debris in a through-wall scupper holds water against the wall and its liner.
Sealing the wall-to-roof joint protects the wall as well as the roof.
Every repair type below includes a look at the parapet and wall flashing, since that is where Hartford calls tend to start.
Membrane turned up the parapet gets new base flashing and a resealed termination bar along with any field seam repairs.
Flat Roof RepairMetal buildings with parapets get coping and gutter work behind the wall, where built-in gutters hold water after rain.
Commercial Metal Roof RepairWall leaks get water tested one coping joint at a time until the opening that matches the stain is found.
Commercial Roof Leak RepairLarger buildings with long parapet runs get coping and counterflashing repairs planned section by section.
Industrial Roof RepairCall and tell us which wall and how high the stain sits. That points straight to the parapet section above it.
Five steps that work from the coping down to the roof membrane.
We check the coping cap, joint covers, counterflashing, and base flashing along each parapet, then look inside the building for matching stains.

Water testing runs one coping joint at a time, from the low end of the wall up, while someone watches inside.
Joint covers are resealed or replaced, and loose coping sections are refastened so they shed water outward.
Counterflashing is re-secured into the reglet, base flashing tears are patched, and the termination bar is resealed.
Scuppers are cleared and relined, and open mortar joints near the roof line are repointed before the final check.
Hartford is part of our commercial roof repair coverage, which runs from Owensboro to five nearby towns.
Outside the towns listed? Call us or send us a message.
Commercial roof repair for Owensboro and the rest of Daviess County, from plants to storefronts.
Owensboro commercial roof repairAnswers on parapets, coping, and permits in Hartford.
Parapets
By resealing or replacing coping joint covers, re-securing loose counterflashing into the reglet, patching base flashing tears, resealing the termination bar, clearing through-wall scuppers and their liners, and repointing open mortar near the roof line. Water entering at the cap runs down inside the wall and shows up looking like a roof leak.
Stains high on an outside wall or along the ceiling edge next to it point to the parapet. Water testing the coping joints one at a time while someone watches inside confirms it before any membrane is opened. Wall leaks also tend to follow wind-driven rain from one direction, which a log of dates and weather makes easy to spot.
Permits
Hartford, the Ohio County seat, follows the state building inspector path for larger repairs, since the state inspector is the building inspector on Ohio County's contact sheet. Coping reseals and flashing patches seldom reach that level, while rebuilding a parapet or replacing deck can.
City Hall can add rules inside city limits, so larger wall or roof work gets a call there as well as the state review question. A short call confirms them before the work is scheduled, and photos of the wall and the planned repair make that call quick.
Walls
Sealant at coping joints dries and cracks, fasteners loosen, and mortar near the roof line opens up over the years. Each gap lets water into the top of the wall, where it runs down behind the flashing.
Often, when the metal is straight and solid. It is pulled from the reglet, the reglet is cleaned, and the flashing is re-secured and sealed. Bent or rusted pieces are replaced with new metal formed to the same profile.
Tell us which wall shows the stain and how old the building is. We start the check at the coping.
Leave a name and number and we will call you about the leak or damage you are seeing.
Or call now: (270) 260-2459